Contra angle handpiece

1) Low Speed 22,000-27,000 rpm.

2) The shank of the instrument mounted therein is 2.35 mm

3) Fastening of the instruments with a turning latch·

4) 135°C Autoclavable·

5) For any lab or E-type motors·

6) have two type for the client select: push button & wrench

Straight handpiece

1)  Working pressure: 0.3MPa (4-hole);

2) 0.25MPa (2-hole) (Measure meter is installed at the end of air motor to measure the air pressure).

3) Revolution: about 22000-27000r/min (adjustable between clockwise or anticlockwise)

4) Noise: ≤68dB

5) Air consumption: about 56L/min

6) Ratio: 1:1

7) Max speed of contra angle: 25000rpm/min.

Air Motor

1) Supply air pressure: 245-392KPa (2.5-4kgf/CM2)

2) 1:1 Direct Drive

3) Connector:2 holes or 4 holes

4) Max speed :20,000 rpm/min.